Seapro Lite+ Marine Navigation Software
 |
 |
 |
 |
 |
|
SeaPro Lite+ Marine Navigation Software
 Electronic chart plotting has never been more affordable or simpler than with SeaPro Lite Marine Navigation Software.
- Simple set up - just connect your GPS to the serial port of your computer to see your vessels position on the chart
- Built in support for multiple chart types both vector (Livechart) and raster (ARCS, BSB). Seamless change between the different formats - allow SeaPro Lite to automatically choose the best scaled chart for you (Lite+ only)
- Chart rotation - either Head up or North up
- Flashing light sequences (on vector charts as available)
- Chart zoom and panning tools - move around charts quickly and easily
- Route planning and monitoring - Position waypoints easily by clicking the mouse button or edit them manually for precise positioning. 'On Route' information includes bearing and distance to next waypoint. All routes can be saved and re-used as required
- Autopilot control - Once a route has been created, information can be sent to the NMEA0183-compatible autopilot allowing it to steer to each waypoint
- Measure tool - Measure distances and bearings quickly
- Extended track line - Shows your boat's position at 30 and 60 minutes based on current speed and course
- Dockable toolbars - Place your toolbars where you need them, either on the chart or neatly stowed at the top, bottom or side of the screen
- Folio mode - Charts may be selected manually or you can allow the system to choose the appropriate charts for you
PC Requirements:
|
Operating system
(Note 1) |
MS Windows 98/ME/2000/XP |
MS Windows 2000/XP |
MS Windows 2000/XP |
MS Windows 2000/XP |
| Processor |
Pentium 2 300 MHz |
Pentium 3 750 MHz |
Pentium 3 1.1 GHz or better |
Pentium 3 1.1 GHz |
| RAM (Note 1) |
64 MBytes |
256 MB |
256 MB/512 MB |
256 MB/512 MB |
| Hard disk space |
300 MBytes - Maximum amount depends on number of charts required and type |
|
|
|
| Serial ports (Note 2) |
1 |
1 |
|
|
| Parallel or USB port (Note 3) |
1 for security dongle |
USB |
|
|
| Graphics display |
800 x 600 16-bit colours |
1024 x 758 or better
accelerated graphics card |
3D accelerated graphics card equivalent Nvidia geForce 2/ATI Radon or better |
as for 3D pilot |
| Misc. |
CD ROM Drive |
|
|
|
| |
|
|
|
Note 1: The minimum level depends on your operating system requirements.
For example you need at least 128 MBytes to effectively run Windows 2000 or XP.
Most medium range modern computer\laptops will meet the specifications for all of the above.
Note 2: Some laptops do not have a serial port. You will need to add a USB to serial cable.
Note 3: If your laptop does not have a parallel port, order the USB dongle option |
| |
The above are recommended minimums especially with S57 and 3D; higher specifications will mean your PC will also work better with other/more applications and extend its useful life. |
SeaPro Lite Marine Navigation Software
Electronic chart plotting has never been more affordable or simpler than with seaPro Lite. This easy-to-use system combines high quality charts with practical navigation functionality. SeaPro Lite is designed for those who wish to get to grips with PC based chart plotters without the initial expense of a fully featured system, or feel that the amount of sailing they do does not justify a more costly solution. |
|
 |
|
|
|
|
