Garmin GPS 72 Handheld GPS Unit

Garmin GPS 72 Handheld GPS Unit

The Garmin GPS 72 Handheld GPS Unit is a low-cost solution for land or marine navigation designed to provide precise GPS positioning using correction data obtained from the Wide Area Augmentation System (WAAS).

TheGarmin GPS 72 Handheld GPS Unit can provide position accuracy to less than 3 metres when receiving WAAS corrections.

This rugged, waterproof, unsinkable GPS receiver offers a large, 4-level greyscale screen.

The Garmin GPS 72 Handheld GPS Unit is designed as the next generation in basic, entry-level Garmin GPS.

GPS 72 features include:

• Built-in quad helix receiving antenna
• High-contrast FSTN, 4-level gray scale (120 x 160 pixels) display
• Backlit display and keypad
• Permanent user data storage; no memory battery required
• Water resistant, IEC-529, IPX7 (submersible 1 m @ 30 minutes) and floatable
• 500 user waypoints with name and graphic symbol; 50 reversible routes
• Position formats include Lat/Lon, UTM, Loran TDs, Maidenhead, MGRS and user grid
• Audible alarms for anchor drag, arrival, off-course, proximity waypoint and clock
• 'Large numbers' option for easy viewing
• 1 MB internal memory for loading MapSource Points of Interest data
• Trip computer provides odometer, stopped time, moving average, overall average, total time, max speed and more
• Automatic track log; 10 saved tracks let you retrace your path in both directions
• Course and speed filtering
• Built-in celestial tables for best time to fish, plus sun and moon calculations

Optional Accessories for GPS 72

• AC/PC, USA adapter, 4 pin 010-10277-00 Allows you to connect your GPS unit to AC power (US 110-volt) and to your PC. Features standard 9-pin D connector.
• GA 27C low profile remote automobile antenna 010-10052-05 Runs on alower voltage to minimise battery drain. Comes with magnetic mount for outside of your vehicle or boat. Suction mount holds for inside windshield or window. With 8 ft of cable and MCX connector. Size: 2.75L x 2W x 0.75H in.
• GA 26/27 series trunk lip antenna mount 010-10061-00 This one-piece mount slips over the edge of the trunk or other surface and held in place by 2 locking screws.
• GA 26/27 series flange antenna mount 010-10062-00 One-piece flange mount adds structural strength if you're mounting a GA 26/27 and GA 26C/27C antenna to a thin surface, such as the outside of an RV, boat or car.
• Marine Mount 010-10300-00 Adjustable marine mount swivels and tilts for optimum viewing and has a locking mechanism to keep unit secure. Accepts optional external power adapter for quick connection to DC power supply.
• Power/data cable 010-10082-00 Has bare wires at the end to hard wire your GPS directly to a DC power source or some other electronic device. Allows you to send speed and position data to devices such as a chartplotter, computer, auto pilot, radar, etc.
• Cigarette lighter adapter 010-10085-00 Plugs into any standard cigarette lighter receptacle to power your GPS.
• Handlebar mount bracket 010-10305-01 Mount fits up to a 1-inch diameter bar and is perfect for your bike, motorcycle or ATV. Includes hardware and instructions.
• PC interface cable with cigarette lighter adapter 010-10165-00 Cable allows powerful connection between your GPS and PC. Create routes and waypoints on your PC and transfer them to your GPS. You can also download map detail from MapSource CD-ROMs to compatible units. Cable features a standard 9-pin D connector. Connects to any 12-volt receptacle.
• Auto Navigation kit 010-10509-01 Auto navigation kit (City Select NA, full unlk, friction mount, dash mount and 12-volt power cable).
• Data Cable (bare data wires) 010-10086-00 Has bare wires at the end to hard wire your GPS directly to another electronic device. Allows you to send speed and position data to devices such as a chartplotter, computer, auto pilot, radar, etc. Data cable doesn't have power - has to run off your unit's batteries.
• PC interface cable 010-10141-00 Allows powerful connection between your GPS and PC. Create routes and waypoints on your PC and transfer them to your GPS. You can also download map detail from MapSource CD-ROMs to compatible units. Cable features a standard 9-pin D connector. Does not provide wiring for external power.
• Data transfer cable (unit to unit) 010-10142-00 This cable bridges the gap so you can transfer data such as waypoints, routes and tracks between GPS units.
• Carrying case 010-10117-02 This nylon carrying case protects your unit while in storage or in the field. Features a wide zippered opening and a belt loop for accessibility and portability.

See model names/numbers of each one by pointing the mouse over the image.

See model names/numbers of each one by pointing the mouse over the image.